ENET-S7300-S

ENET-S7300-S function

1, support multi-master station communication, the expansion port can be connected to the touch screen or other main station.

2. Set the parameters and run to diagnose the device through the WEB server or the configuration diagnostic tool BCDevice.

3, Porter rate 9.6 Kbps ~ 6 Mbps adaptive.

4. Installed on the 35mm guide rail and connected to the PPI / MPI / PROFIBUS communication port of PLC via DP cable, requiring external 24VDC power supply.

5. Integrated WiFi function, and support AP mode, STA mode and AP + STA mode.

6, PLC programming, data acquisition and data exchange through WiFi.

7. Support the function of communication with ethernet interfaces of S7-200, S7-200SMART, S7-1200 / 1500, S7-300, S7-400 and ModbusTCP main slave function.

8. The expanded nine-pin master port supports the main and slave station function of modbusRTU.

9. Support Siemens S7 Ethernet communication driver, including MicroWIN, STEP 7, Botu and WinCC, etc.

10. Users can adopt high-level language programming (such as VB, VC, C #, etc.) according to ENETS7 protocol to realize data communication with S7-200 / 300 / 400 and facilitate the development of production management system.

11. Provide the ENETS7 OPC server for free, support OPC, and the SCADA of the channel communicates with PLC by OPC.

12. Integrated ModbusTCP server, the Modbus data area can be automatically or edited to the S7-200 / 300 / 400 register.

13, can realize S7TCP connection, ModbusTCP communication at the same time, support up to 32 upper computer connection.

14, support the user side through Ethernet to achieve firmware update, one purchase, permanent upgrade.

Typical application

Typical application of ENET-S7300-S bridging type