WITLINE-COM-CAT4 is an industrial grade serial remote communication module launched by Hunan Chenkong Intelligent. This product has the characteristics of high speed and low latency, supporting Cat-4 network access from the three major operators, as well as supporting 4G network access for all network connectivity; The product adopts industrial grade design standards, with built-in independent hardware watchdog, and supports remote upgrades to ensure high reliability; Wide voltage terminal power supply, RS232/RS485/RS422 two standard terminal interfaces, making it more convenient for customers to use and more applicable; The product comes with a guide rail buckle for easy installation.
Functional characteristics
⚫ Network optimization, equipped with Cat-4 network, 150Mbps download, 50Mbps upload, meeting the application scenarios of high-speed serial data transmission;
⚫ Low latency, 4G network hosting, millisecond latency experience;
⚫ LTE Cat. 4 standard, high-speed communication;
⚫ Wide coverage, based on existing operator 4G networks, with high stability;
⚫ No special cards or special packages are required, regular cards can be used;
⚫ Support network transparent transmission function, with serial data directly transmitted to the network end, simple and reliable;
⚫ Support registration package and heartbeat package data;
⚫ Support FTP upgrade protocol;
⚫ Support base station positioning and NTP time updates;
⚫ Multiple parameter setting methods: software configuration for network, SMS, serial port, and computer settings;
⚫ Equipped with security mechanism and multi-level encryption mode login password;
⚫ Supports multiple interfaces of RS232/RS485/RS422, making it more convenient to use;
⚫ Support 9-24V wide voltage power supply;
⚫ Multiple indicator lights, convenient and accurate status judgment;
⚫ Industrial grade design, hardware watchdog, ultra-high reliability.
Introduction to product interface functions:
|
参 数 |
描 述 |
|
|
基本参数 |
WITLINE-COM-CAT4 |
支持移动4G/LTE Cat-4 |
|
支持联通 4G/LTE Cat-4 |
||
|
支持电信 LTE Cat-4 |
||
|
电源 |
供电范围 9V~24V ,推荐值 12V/1A |
|
|
工作电流 |
平均 21mA-50mA, 最大:54mA(12V) |
|
|
状态指示灯 |
4G状态灯:工作状态指示灯,正常 1s 闪烁一次 |
|
|
运行指示灯:设备送电后常亮 |
||
|
4G信号指示灯:三个,显示信号强度 |
||
|
|
||
|
Micro USB 接口 |
从机,Micro USB 口,USB 2.0 High speed, |
|
|
Com 接口 |
支持 RS232,波特率9600~230400(bps) |
|
|
SIM卡槽 |
标准的抽屉式用户卡接口,支持 1.8V/3V SIM 卡
|
|
|
天线接口 |
SMA 外螺内孔 |
|
|
|
RS422端子 |
RS422通讯接口 |
|
|
DC电源接口(圆孔) |
标准24V电源适配器接口 |
|
|
DC电源接口 |
DC9-24v电源接线端子 |
|
外形尺寸 |
尺寸(mm) |
96.6×80.02×31.85 |
|
重量 (克) |
<110g |
|
|
温度范围 |
工作温度 |
-25℃~ +75℃ |
|
存储温度 |
-40℃~ +90℃ |
|
|
湿度范围 |
工作湿度 |
5%~95%(无凝露) |
|
技术规范 |
TDD-LTE |
3GPP Release 13 CAT1 下行 7.5 Mbps,上行 1 Mbps |
|
FDD-LTE |
3GPP Release 13 CAT1 下行 10 Mbps,上行 5 Mbps |
|
|
GSM |
GPRS Class12 下行速率 384 kbps 上行速率 128 kbps |
|
|
频 段 |
TDD-LTE |
Band 38/39/40/41 |
|
FDD-LTE |
Band 1/3/5/8 |
|
|
GSM |
Band 3/8 |
|
|
功率等级 |
TDD-LTE Band 38/39/40/41 |
+23dBm(Power class 3) |
|
FDD-LTE Band 1/3/5/8 |
+23dBm(Power class 3) |
|
PLC connection module remote communication structure
Two step configuration, intelligent control global;
Real time control of device attitude and easy management of global sites;
Drag and drop cloud configuration/mobile monitoring/large screen monitoring/centralized monitoring;
Serial PLC remote debugging artifact is a necessary Debugger for engineers.
Contact: FU Bin
Phone: 18072812386
Tel: 0731-85203816
Email: market@cksky.com.cn
Add: changsha